Professional

Use and Care Guidelines

 USAGE AND MAINTENANCE RULES

 

Ceramic Sanitary Ware

·         Products should be protected from impacts during transportation and usage. Ürünler, taşıma ve kullanımda darbelerden korunmalıdır.

·         The installation should be done by the certified or approved installers recommended by authorized dealers or our company.

·         Before installation, the installation and operating instructions supplied with the product should be examined. Materials such as cement, plaster etc. which expand while setting should not be used during the installation.

·         When installing the product, it is necessary to use the side materials supplied or recommended with the product.

·         Foreign materials (mortar, lime, cloth towel, cigarette stubs, etc.) that will clog up the siphon should not be thrown in the reservoir.

·         Sediments from the interior installation and mains water and foreign materials should be cleaned regularly with descaling materials to avoid stains on the ceramic surface. Permanent stains may form on ceramic surfaces if not cleaned for a long time. 

·         Sweating may occur on the outer surface of the reservoir due to the difference between the water temperature in the reservoir and the ambient temperature. Water droplets should be dried regularly.  

·         After installation, the surfaces should not be hit with hard and sharp objects.

·         Attention should be paid to the fact that defects due to improper installation, maintenance, repair and disassembly by incompetent persons will not be covered by the warranty.  

·         It should not be wiped with cleaners containing acidic or abrasive powder or with hard cleaning tools (wire, sponge, etc.).  

·         The products should be used in accordance with the instructions given in the operating instructions.

·         Warranty period of our sanitary ware products (toilet seat-washbasin-reservoir-foot,closet-pissoir-bidet) is 10 years.

Toilet Seat Covers

·         The installation should be done by the certified or approved installers recommended by authorized dealers our our company.  

·         The installation brochure provided with the product should be reviewed before installation.

·         When installing the product, it is necessary to use the side materials supplied or recommended with the product.

·         After installation, it should be checked whether the cover is working properly.

·         Surface should not be hit with hard and sharp objects.

·         The cover of the toilet seat should never be stepped on.

·         Objects with a high temperature and which may degrade the surface should not be placed on the toilet seat covers.

·         Products should not be left for long periods in construction sites.

·         The surfaces should not be cleaned with hard cleaning tools (wire, hard surface of sponge, etc.), cleaning agents containing acid and abrasive (bleach, anti-lime, ammonia cleaners, hydrochloric acid etc). It should be wiped with soapy water.

·         Materials such as high alcohol, naphtha, thinner and acetone should not be contacted with products.

·         Products should not be repaired by unauthorized persons.

·         The products should be used in accordance with the instructions given in the operating instructions.

·         The warranty period of Toilet Seat Covers is 2 years.

 

 

Internal Installation and Built-in Reservoir

·         Before installation, the installation brochure should be reviewed.

·         The installation should be done by the certified or approved installers recommended by authorized dealers or our company.

·         During installation, the tightness of the assembly should be checked.

·         The filling assembly water level should be adjusted according to the water level of the reservoir.

·         The products should be operated between 0,5 - 10 bar mains water pressure. The mains pressure above 10 bar should not be used without the pressure reducer connected to the installations.

·         Filtered intermediate tap should be used in installations.

·         With the help of a cotton-based damp cloth, it shoudl be cleaned with pure/soapy water or non-scouring/dissolving cleaning materials.  

·         Products should not be left for long periods in construction sites.

·         The installation should be made after cleaning in order to avoid exposure to faults caused by construction waste before installation in new constructions.

·         Surfaces should not be cleaned with hard cleaning tools (wire, hard surface of sponge, etc.).

·         The products should not be cleaned with cleaners containing acid and abrasive powder (such as bleach, ammonia cleaners, hydrochloric acid, etc.).

·         Surfaces should not be hit with hard and sharp objects.

·         No cutting, punching, painting on the product should be done.

·         When installing the product, it is necessary to use the side materials supplied or recommended with the product.

·         The products should be used in accordance with the instructions given in the operating instructions.

·         The warranty period of internal installation is 2 years.